Precision medium pressure manometer

These medium pressure manometers are designed to exact adjusting of medium pressure of the first stage. In order to guarantee an exact readability as possible, the manometers have a diameter of 100mm. The manometers are available in different pressure ranges. Due to the better readability of the manometer you should prefer the model with the smaller pressure range, but the pressure of the manometer should be sufficient for your regulator.

¹⁾ The category of accuracy specifies the percental tolerance allowed from actual metering (in relation to the maximun measuring value). This means, for example, that a manometer with category 1.0 and an ultimate value of 10bar (Metering range 0 to 10bar) is allowed to differ from real value about plus-minus 0,1bar, that is to say, that a real pressure of 9,5bar can be shown as a reading between 9,4 and 9,6bar.

Medium pressure manometer with a category of accuracy of 2,5% (category 2.5) or less are not sufficient exact for adjusting the medium pressure of regulators. In addition, these manometers have mostly a small scale diameter of approximately 50mm, so that the exact meter reading is even more difficult.

The relevance of the safety instructions always depends on the degree of difficulty of the dive and its requirements. The same applies to the execution of technical work.These safety instructions can therefore not be considered comprehensive.

• The user must always be provided with the product description.
• The product may only be used for its intended purpose.
• The training and level of knowledge must fully cover the intended use.
• The user's level of training may restrict the intended use.
• If the user does not understand this description or has doubts, he must not use the product.
• These instructions are not a substitute for training.
• Defective, worn or modified products must not be used.
• The contact of normal steel parts with stainless steel parts also leads to rust stains on stainless steel parts.

• Overloading the pressure gauge will destroy the pressure gauge. This can be recognized by the fact that the pointer no longer returns to the black marked area around zero. This is not a warranty case and does not entitle you to an exchange.