Toggle Switch Set

This switch set is characterized by being extremely reliable. The knob is vulcanised in the socket and already pressure-tight by itself. The switch boot is filled with silicone grease and thus stabilises the boot under pressure against being pressed into the socket. The boot can be therefore not damaged if the knob is used at depth, which is the main cause for untight switch boots. Through this measure a extraordinary pressure-tightness could be achieved.

• Pressure-tight up to 30bar (300m)
• Switchable at 30bar
• Meets US military standard: MIL-STD-108E

Scope of delivery:

• Toggle switch
• O-Ring
• Switch boot
• Silicone grease

Max. Load:

The relevance of the safety instructions always depends on the degree of difficulty of the dive and its requirements. The same applies to the execution of technical work.These safety instructions can therefore not be considered comprehensive.

• The user must always be provided with the product description.
• The product may only be used for its intended purpose.
• The training and level of knowledge must fully cover the intended use.
• The user's level of training may restrict the intended use.
• If the user does not understand this description or has doubts, he must not use the product.
• These instructions are not a substitute for training.
• Defective, worn or modified products must not be used.
• The contact of normal steel parts with stainless steel parts also leads to rust stains on stainless steel parts.

• The switch may only be connected by qualified persons in accordance with the regulations of the country of use concerned.