PValve for Dry Suits

Characteristics:

• Gluing the valve in dry suit is not necessary.
• Leak-proof sealing due to O-ring toward to suit.
• For cleaning the valve can be removed and assembled in a leak-proofing manner easily.
• The high of the valve inside the suit is only about 13mm, nevertheless the same flow is reached as with well-knows valves.
• The valve in the suit is affixed by five screws and not only with one central thread. Thus the cover cap can be opened without removing the whole valve unintentional. Witch leads to a fatal flooding. Note: The screws are well rounded and do not damage the under suit.
• For the five screws metal threaded bushes are begun into the plastic part, like that the threads are very loadable in the counterpart.
• The valve can be opened and closed with one turn.
• The cover cap has a defined and exact turn stop.

Technical specifications:

• Flow with 0.5m water gauge (0,05bar corresponds): 2 litres/min
• Hole diameter: 19mm
• Height in the suit approx. 13mm
• Cover cap diameter: 42mm
• Height outside at the suit approx. 20mm
• Balanced and unbalanced available.

Included in delivery:

• 1 x PeeValve inclusive all screws and sealings
• 0,6m tube 1 x Trox-Screwdriver
• 1 x Connection fitting (Condom fitting)

The relevance of the safety instructions always depends on the degree of difficulty of the dive and its requirements. The same applies to the execution of technical work.These safety instructions can therefore not be considered comprehensive.

• The user must always be provided with the product description.
• The product may only be used for its intended purpose.
• The training and level of knowledge must fully cover the intended use.
• The user's level of training may restrict the intended use.
• If the user does not understand this description or has doubts, he must not use the product.
• These instructions are not a substitute for training.
• Defective, worn or modified products must not be used.
• The contact of normal steel parts with stainless steel parts also leads to rust stains on stainless steel parts.

• If you are unsure about the installation, have the valve installed by qualified personnel.