Single Tank Adapter

The single tank adapter is of outstanding quality. In contrast to conventional single-tank adapters, all edges have a milled radius. This protects the webbing as much as possible. Due to its excellent workmanship, the single-tank adapter has a very beautiful appearance.

Different screw lengths are included in the set, so that the corresponding screws can be used as required.

Allow me to call your attention: The upper belt groove is offset downwards, so that the bottle can be set much lower than with normal adapters.

Properties:

• Material: 3mm approx. 0,9kg seawater resistant stainless steel (1.4571 ; 316Ti)
• Material: 6mm approx. 1,8kg seawater resistant stainless steel (1.4571 ; 316Ti)
• Bolt spacing: 11 inch = 279.4 mm (Fits any backplate with standard 11 inch hole spacing)
• Surface: Matt (blasted)
• Dimensions: Length = 312mm Width = 120mm

Delivery:
    1 x Sing-Tank-Adapter in selected thickness
    2 x wing nut
    2 x serrated lock washer
    2 x screw 25mm long
    2 x screw 30mm long
    2 x screw 35mm long
    2 x screw 40mm long
    2 x O-ring to hold the screws

The relevance of the safety instructions always depends on the degree of difficulty of the dive and its requirements. The same applies to the execution of technical work.These safety instructions can therefore not be considered comprehensive.

• The user must always be provided with the product description.
• The product may only be used for its intended purpose.
• The training and level of knowledge must fully cover the intended use.
• The user's level of training may restrict the intended use.
• If the user does not understand this description or has doubts, he must not use the product.
• These instructions are not a substitute for training.
• Defective, worn or modified products must not be used.
• The contact of normal steel parts with stainless steel parts also leads to rust stains on stainless steel parts.